You wash the sheets, pull the duvet all the way up to the pillows and smooth out every wrinkle. Then you step back, and the bed still looks flat. Nothing like the puffy, inviting beds in hotel rooms, and you start wondering whether you need a thicker comforter.
This is not your fault. Most of us learned that a made bed means a duvet pulled up to the headboard and stretched tight. But the way designers make a bed starts with one step most people skip, and it doesn’t cost a thing.
Why a perfectly smooth bed looks flat
When the duvet is pulled all the way up, it lies across the mattress in one even layer. Nothing at the top of the bed adds shape or height, so the whole bed reads as a flat surface.
Interior designer Loui Burke shared the fix in an Instagram video, as Apartment Therapy reported: fold the duvet and top sheet back on themselves 40 centimeters, or about 15 inches.
According to the article, the folded duvet helps create overall height and fluffiness, especially when paired with a chunky throw blanket, so the bed looks more like a cloud. Apartment Therapy adds that many luxury hotels use the same styling move to make their rooms feel loftier. The cuff also puts the sheets on display, which is a bonus if yours are printed.
The 15-inch fold, step by step
- Lay the top sheet. Spread it over the fitted sheet. If it’s printed, the article suggests laying it print side down, so the print faces up once the cuff is folded.
- Pull the duvet up. Bring it to the head of the bed, lined up with the top edge of the sheet.
- Fold both back together. Fold the duvet and the top sheet back about 15 inches. Check it once with a tape measure if you like, then eyeball it from then on.
- Fluff the cuff. Don’t press the fold flat. Loosen it with your hands so it sits soft and puffy.
- Finish the top. Stack your sleeping pillows against the headboard and add a lumbar pillow in front, two more tips from the same article. Lay a chunky throw across the foot of the bed.
Plan B if a single fold still looks thin: Havenly designer Heather Goerzen’s tip, from Havenly’s bed styling guide, is to fold the duvet twice for extra volume.
What the fold can’t fix
The number isn’t sacred. Apartment Therapy notes that as long as you give yourself a nice fluffy cuff, you’ll see the difference right away, so an inch or two either way is fine.
Know the limits, too. A fold uses up length, so a duvet that barely covers the mattress may come up short at the foot once it’s cuffed. A flattened insert or a lumpy cover will still look tired, folded or not, and that’s the point where new bedding might be worth it. And the extra pillows and throw are for daytime styling: move them off the bed at night so they don’t end up on the floor or tangled under your feet.
If you’d rather make the throw yourself, these knitted blanket ideas include chunky throws that work well at the foot of the bed.
Same duvet, same sheets, one 15-inch fold. That’s the trick.





